Archives: Videos

  • RPC Lesson 3: Climbing & Descending (Pre-flight)

    In this lesson you will learn how to climb and descend the aircraft at varying angles of climb and varying rates of descent.

  • RPC Lesson 5: Stalls (Inflight 3D)

    In this lesson you will learn how to identify the impending stall and recover with a minimal loss of height. You will learn about critical angle of attack and factors affecting the stall.

  • RPC Lesson 8: Circuits Part 3 (Inflight Video 3D)

    In this lesson you will learn how to handle an engine failure just after take off and in the circuit area, how to deal with a flap fire and an instrument failure.

  • RPC Lesson 6: Circuits Part 1 (Inflight Video)

    In this lesson you will learn how to take off, fly an accurate circuit and land the aircraft. You will learn about the legs of a circuit, upwind, cross wind, downwind, base and final. You will learn about the flare and hold off and how to land accurately.

  • RPC Lesson 4: Turning (Inflight)

    In this lesson you will learn how to turn the aircraft while maintaining balance and height at varying angles of bank. You will also learn how to turn while climbing and descending, steep turns and how to identify a spiral descent.

  • RPC Lesson 2: Straight & Level (Pre-flight Briefing)

    In this lesson you will learn what straight and level is and how to maintain straight and level at different airspeeds by using both the horizon as a reference and the aircraft instruments also the effective use of trim.

  • RPC Lesson 6: Circuits Part 1 (Summaries 3D)

    In this lesson you will learn how to take off, fly an accurate circuit and land the aircraft. You will learn about the legs of a circuit, upwind, x wind, downwind, base and final. You will learn about the flare and hold off and how to land accurately.

  • RPC Lesson 9: Practice Forced Landings (Summaries 3D)

    In this lesson you will learn how to identify a field to land on in the event of an inflight emergency such as an engine failure. You will learn how to complete your emergency procedures and land safely in the event of an engine failure.

  • RPC Lesson 1: Effects of Controls (Summaries 3D)

    In this lesson you will learn about the control surfaces and the primary, secondary and further effects of these control surfaces and how they affect the aircraft. Learn in detail about the elevator, rudder and aileron and how the propeller and power affects the aircraft.

  • RPC Lesson 11: Inbound Joins (Summaries 3D)

    In this lesson you will learn how to safely depart and arrive at an aerodrome and the use of appropriate radio calls.

7 Day

FREE

Trial

Get access to the complete catalogue of your chosen subscription level for 7 days. After your free trial, your paid subscription automatically commences. Cancel anytime.

Get FREE Trial

Our
Partners